Comparative Study of Arch Roof Truss and Flat Roof Truss for Aircraft Hangar of Boeing 737

Nawaz Sharif, Dr. Umesh Pendarker

Volume 6, Issue 3 2022

Page: 1-11

Abstract

This research attempts to perform a comparative study to identify better choice between the arch or flat roof truss for aircraft hangar. As growing trend of air buses, this research focuses to design and analyze the aircraft hangar for Boeing 737. The aircraft hangar with dimension 36 X 32 X 12 meters is considered for particular study Three model for both Arch and flat roof truss with varying depth of 2-meter, 4 meter and 6 meters are modelled in STAAD pro and analysis is performed. The final results conclude that arch roof truss is most suitable for over flat roof truss as arch roof truss gives very less value for deflection and fewer more steel as compare to flat roof truss. Hence arch roof truss is best suitable for construction of aircraft hangar because it gives less deflection.

Back Download



References

  • A.Jayaraman1, R Geethamani2, N Sathyakumar3 and N Karthiga4 Shenbagam “design and economical of roof trusses & purlins (comparison of limit state and working stress method)”, IJRET, Volume: 03 Issue: 10 Oct-201, eISSN: 2319-1163, pISSN: 2321-7308, pp 199-207.
  • Ankush Limbage and Kshitija Kadam “Analysis of steel roof A- type truss for four different spans (Comparison of design presented in SP-38 and IS 875)”, ISLTET, Vol. 6, Issue- 04 march 2016, ISSN-2278- 61X, pp 439-443.
  • Goraviyala Yogesh and Prof. K. C. Koradiya “Design and Comparison of Steel Roof Truss with Tubular Section (using SP: 38 And IS: 800-2007)”, IJSRD, Vol. 4, Issue 02, 2016 , ISSN (online): 2321-0613, pp 972- 974.
  • Ichiro Imai, Akira Suzuki, Yoshihito Tsukada and Yoshikatsu Tsuboi; Paper M3, “Design and Construction of Aircraft hangars in Japan - Part 3: Design and Construction of Huge Space Frame Roof Using Diagonal Grid Beam Truss for Jet Hangars”, Proceedings of the IASS Symposium on “Innovative Applications of Shells and Spatial Forms”, Bangalore, India, 1988, Vol II p.895.
  • K. N. Kadam and A. J. Limbage “Comparison of Member Forces in A-Type Truss Using IS875 and SP38”, International Journal of Engineering Research,ISSN:2319-6890(online),2347-5013(print),Volume No.5 ,Issue:27-28 Feb. 2016, pp: 644-647.
  • Kubadera Isao, Yoshikatsu Tusuboi and Ichiro Imai., Paper M4 “Design and Construction of Aircraft Hangars in Japan”, Part 4: “Design and Construction of the Hangar for Overhauling in Thin Shell Construction”, Proceedings of the IASS Symposium on “Innovative Applications of Shells and Spatial Forms”, Bangalore.
  • M.G.Kalyanshetti and G.S. Mirajkar “Comparison Between Conventional Steel Structures And Tubular Steel Structures”, IJERA, Vol. 2, Issue 6, November- December 2012, ISSN: 2248-9622, pp 1460-1464.
  • Miranda, E. and Bertero, V. V. (1994), Evaluation of strength reduction factors for earthquake-resistant design‟, Earthquake Spectra, EERI, vol. 2, pp. 357-379.
  • Ramasawmy “Review of Recent Trends in the Planning, Analysis, Design and Construction of Space Frame Roofs for Aircraft Hangars”
  • Rudolph, Peter; A “Three Dimensional” Concept for Multi-Form Hangars, Airport Forum, no. 4/1980.
  • Sagar D. Wankhade1 and Prof. P. S. Pajgade2 “Design & Comparison of Various Types of Industrial Buildings”, IRJES, Volume 3, Issue 6 (June 2014), ISSN (Online) 2319-183X, (Print) 2319-1821, pp 13-29.
  • Soni Prabhat, Dubey S.K and Sangamnerkar Prakash “Comparison of Design of Steel Roof Truss using IS 875 and SP 38”, International Science Congress Association, Vol. 2(5), May (2013), ISSN 2278 – 9472, pp 47- 49.
  • Yash Patel, Yashveersinh Chhasatia, Shreepalsinh Gohil, Prof. Tausif Kauswala and Het Parmar “Analysis and Design of Conventional Industrial Roof Truss and Compare it with Tubular Industrial Roof Truss”, IJSTE, Volume 2, Issue 10 April 2016, ISSN (online): 2349- 784X, pp 943-948.
  • Kubik, L.A, Kubik, M.L. and Chilton, J.C., “Design and Construction of the CUBIC Space Frame Roof, Maintenance Hangar, Stanstead Airport” Vol 1, Projects and Project Studies, Proceedings of the IASS Symposium on “Spatial Structures at the Turn of the Millennium”, Copenhagen, Denmark, 2-6, Sep, 91.

Looking for Paper Publication??

Come to us.

Submit your Paper